Skip navigation

toonel.net

toonel.net is an experiment in a technique for conserving network bandwidth. If you are paying a fee based on the amount of data you transfer (e.g. 3G/GPRS/DSL/CDMA) and have monthly download limit, or if you have narrowband connection (e.g. dialup modem) then you are most likely to appreciate the service toonel.net offers. There are number of toonel.net client application packages. All solutions are 100% Java based and therefore this service can be used on any platform with an installed Java Runtime Environment, including mobile phones.

toonel.net: what is it good for? Why toonel.net is different?
expensive transports (e.g. GPRS, CDMA…) cross platform
narrowband or slow connections (e.g. dial-up) built from open source components
stretching download limits allows to compress virtually any traffic

Also its free for download.

The compression ratio will depend on the type of content you are consuming. For HTTP traffic you can expect about 70% compression level for outgoing requests and about 30% for downloads.You can expect connection speed improvements for narrowband connections although speed improvements for broadband connections can be not obvious.

For FAQs and downloads visit:http://www.toonel.net/

toonel.net: what is it good for? Why toonel.net is different?
expensive transports (e.g. GPRS, CDMA…) cross platform
narrowband or slow connections (e.g. dial-up) built from open source components
stretching download limits allows to compress virtually any traffic

E-mail to SMS gateways are helpful in providing SMS alerts of e-mail on a cell phone. Since the alerts are received via SMS, the phone need not be GPRS enabled. Its helpful in providing alerts regarding important mails (like business mails) even when the person is travelling. The message does not contain the mail itself,  just the sender’s ID.  But the method is useful nonetheless, for example in phones without GPRS.

Find an E-mail to SMS gateway

Below is the complete list of (currently known) Email to SMS Gateways. Using the list below simply replace the n in each entry with your own mobile number. Send an email to this address and a message will be sent automatically to your mobile device.

AUSTRALIA
0n@optusmobile.com.au T-Mobile/Optus Zoo
AUSTRIA
43676n@sms.t-mobile.at T-Mobile
BULGARIA
n@sms.mtel.net Mtel
n@sms.globul.bg Globul
CANADA
n@wirefree.informe.ca Aliant
n@txt.bellmobility.ca Bell Mobility
n@fido.ca Fido
n@text.mtsmobility.com MTS Mobility
n@pcs.rogers.com Rogers Wireless
n@pcs.sasktelmobility.com Sasktel Mobility
n@msg.telus.com Telus
n@vmobile.ca Virgin Mobile
n@mobiletxt.ca President’s Choice
GERMANY
0n@t-d1-sms.de T-Mobile
0n@vodafone-sms.de Vodafone
0n@o2online.de O2
0n@smsmail.eplus.de E-Plus
ICELAND
n@sms.is OgVodafone
n@box.is Siminn
INDIA
91n@airtelap.com Andhra Pradesh AirTel
9848n@ideacellular.net Andhra Pradesh Idea Cellular
919840n@airtelchennai.com Chennai Skycell / Airtel
9841n@rpgmail.net Chennai RPG Cellular
919810n@airtelmail.com Delhi Airtel
9811n@delhi.hutch.co.in Delhi Hutch
9824n@ideacellular.net Gujarat Idea Cellular
919898n@airtelmail.com Gujarat Airtel
9825n@celforce.com Gujarat Celforce / Fascel
919890n@airtelmail.com Goa Airtel
9823n@bplmobile.com Goa BPL Mobile
9822n@ideacellular.net Goa Idea Cellular
919896n@airtelmail.com Haryana Airtel
9812n@escotelmobile.com Haryana Escotel
919816n@airtelmail.com Himachal Pradesh Airtel
919845n@airtelkk.com Karnataka Airtel
919895n@airtelkerala.com Kerala Airtel
9847n@escotelmobile.com Kerala Escotel
9846n@bplmobile.com Kerala BPL Mobile
919831n@airtelkol.com or Kolkata Airtel
919893n@airtelmail.com Madhya Pradesh Airtel
919890n@airtelmail.com Maharashtra Airtel
9823n@bplmobile.com Maharashtra BPL Mobile
9822n@ideacellular.net Maharashtra Idea Cellular
919892n@airtelmail.com Mumbai Airtel
9821n@bplmobile.com Mumbai BPL Mobile
919815n@airtelmail.com Punjab Airtel
9843n@bplmobile.com Pondicherry BPL Mobile
919894n@airtelmail.com Tamil Nadu Airtel
919843n@bplmobile.com Tamil Nadu BPL Mobile
9842n@airsms.com Tamil Nadu Aircel
9837n@escotelmobile.com Uttar Pradesh West Escotel
IRELAND
n@sms.mymeteor.ie Meteor
n@mms.mymeteor.ie Meteor MMS
ITALY
0n@timnet.com TIM
3**n@sms.vodafone.it Vodafone
JAPAN
n@ezweb.ne.jp AU by KDDI
n@docomo.ne.jp NTT DoCoMo
n@n.vodafone.ne.jp Vodafone Chuugoku/Western
n@d.vodafone.ne.jp Vodafone Hokkaido
n@r.vodafone.ne.jp Vodafone Hokuriko/Central North
n@k.vodafone.ne.jp Vodafone Kansai/West, including Osaka
n@t.vodafone.ne.jp Vodafone Kanto/Koushin/East, including Tokyo
n@q.vodafone.ne.jp Vodafone Kyuushu/Okinawa
n@s.vodafone.ne.jp Vodafone Shikoku
n@h.vodafone.ne.jp Vodafone Touhoku/Niigata/North
n@c.vodafone.ne.jp Vodafone Toukai/Central
n@pdx.ne.jp Willcom
n@di.pdx.ne.jp Willcom di
n@dj.pdx.ne.jp Willcom dj
n@dk.pdx.ne.jp Willcom dk
NETHERLANDS
31n@gin.nl T-Mobile
0n@sms.orange.nl Orange
SINGAPORE
n@m1.com.sg M1
SOUTH AFRICA
n@voda.co.za Vodacom
SPAIN
0n@movistar.net Telefonica Movistar
0n@vodafone.es Vodafone
SWEDEN
0n@sms.tele2.se Tele2
UNITED STATES
n@teleflip.com Teleflip
n@message.alltel.com Alltel
n@paging.acswireless.com Ameritech
n@txt.att.net ATT Wireless
n@bellsouth.cl Bellsouth
n@myboostmobile.com Boost
n@mobile.celloneusa.com CellularOne
n@mms.uscc.net CellularOne MMS
1n@mobile.mycingular.com Cingular
n@sms.edgewireless.com Edge Wireless
n@messaging.sprintpcs.com Sprint PCS
n@tmomail.net T-Mobile
n@mymetropcs.com Metro PCS
n@messaging.nextel.com Nextel
n@mobile.celloneusa.com O2
n@mobile.celloneusa.com Orange
n@qwestmp.com Qwest
n@pcs.rogers.com Rogers Wireless
n@msg.telus.com Telus Mobility
n@email.uscc.net US Cellular
n@vtext.com Verizon
n@vmobl.com Virgin Mobile
UNITED KINGDOM
44n@mobile.celloneusa.com O2 #1
44n@mmail.co.uk O2 #2
0n@orange.net Orange
0n@t-mobile.uk.net T-Mobile
0n@vxtras.com Virgin Mobile
0n@vodafone.net Vodafone

For users not covered by the networks above:

There is a second method.  There are some gateway service providers like 160by2,way2sms etc). Now in India there is a gateway service available at way2sms.com (other users need to search for a similar service themselves).

1.Register at way2sms.com by providing the recipient mobile no.  and an e-mail ID.

2.Create a way2sms e-mail account of the form ’10digitmobileno@way2sms.com’.

3.Click on the mail alerts tab to activate mail alerts  and set preferences.

An example is shown below:

Create A Mail Filter

Now , for a G-mail ID ( I have not tried with the other IDs) open the G-mail account and create a filter for the ID for which alerts are needed (the create filter link is at the top) .

Create new filter and enter the email address for which you want to receive SMS alert.

In the next step, setup a Forward rule to your free email-to-sms number.

The forwarding address will be any 1 of the sms gateway addresses.

For  eg: for a T-mobile no. it will be: ‘number@tmomail.net’. Or it can be the way2sms ID ‘number@way2sms.com ‘ .

Now everytime a mail is received from the above mentioned ID, an sms alert will be received.

Note: There are a lot many sites that list e-mail to SMS gateway addresses for different networks.  Like this one:http://www.sms411.net/2006/07/how-to-send-email-to-phone.html

If you find anymore gateways please let me know.

For a windows user migrating to linux  leaving behind one’s favorite windows games and applications is a problem. Now, the solution to this is obviously running linux natively in windows.

A commercial PC virtualisation software like VMware could solve the problem but its an expensive option. Another solution is using coLinux(cooperative linux).

Cooperative Linux is the first method for optimally running Linux on Windows and other operating systems natively. It is a port of the Linux kernel and support code that allows it to run cooperatively without emulation along with another operating system. coLinux differs itself by being more of a merger of Windows and the Linux kernel and not an emulated PC, making it more efficient.

coLinux is great. It consists of a lot of binary packages that can be selected by the user. Files are available for download here: http://sourceforge.net/projects/colinux/files/

An important issue needs to be considered before starting of with installation. Windows is case-insensitive i.e files like kernel2.6 and KERNEL2.6 are the same in windows but in linux they denote different files. Hence while installing packages windows replaces files with same names but different cases. If this is ignored , after installation some commands do not work. To avoid this problem windows has to be made case  sensitive.

Open rregistry editor. Locate the HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\kernel\ dword:ObCaseInsensitive registry key. This key determines whether a file system is case sensitive or case insensitive. If the value of this key is set to 1, the file system is treated as case insensitive. If the value of this key is set to 0, the file system is treated as case sensitive.  Set the value to 0.  Save and restart computer. Now start with the installation.

A simpler version is andLinux.

andLinux is a complete Ubuntu Linux system running seamlessly in Windows 2000 based systems (2000, XP, 2003, Vista, 7; 32-bit versions only). andLinux uses coLinux as its core which is confusing for many people.  Xming  is used as X server and PulseAudio as sound server. andLinux  runs almost all Linux applications without modification.

For download and installation details visit the site: http://www.andlinux.org/

Greasemonkey is a firefox extension that lets you write scripts that alter the web pages you visit. With greasemonkey you can fix bugs, automatically retrieve info. from sites, or in general improve your web experience. Greasemonkey is a very popular extension now.The scripts run by greasemonkey are all java scripts. You can either write your own scripts or download them from a repository of  javascripts  at:

http://userscripts.org/

Special search syntaxes.s These are some of my favourite ones.  I use these often during my searches:
intitle:
intitle: restricts your search to the titles of web pages. The variation allintitle: finds pages wherein all the words specified appear in the title of the web page. Using allintitle: is basically the same as using the intitle: before each keyword.

intitle:"george bush"

allintitle:"money supply" economics

You may wish to avoid the allintitle: variation, because it doesn’t mix well with some of the other syntax elements.

intext:
intext: searches only body text (i.e., ignores link text, URLs, and titles). While its uses are limited, it’s perfect for finding query words that might be too common in URLs or link titles.

intext:"yahoo.com"

intext:html

There’s an allintext: variation, but again, this doesn’t play well with others.

inanchor:
inanchor: searches for text in a page’s link anchors. A link anchor is the descriptive text of a link. For example, the link anchor in the HTML code <a href="http://www.oreilly.com">O'Reilly Media</a> is “O’Reilly Media.”

inanchor:"tom peters"

As with other in*: syntax elements, there’s an allinanchor: variation, which works in a similar way (i.e., all the keywords specified must appear in a page’s link anchors).

site:
site: allows you to narrow your search by either a site or a top-level domain. The AltaVista search engine, by contrast, has two syntax elements for this function (host: and domain ), but Google has only the one.

site:loc.gov

site:thomas.loc.gov

site:edu

site:nc.us

Be aware that site: is no good for trying to search for a page that exists beneath the main or default site (i.e., in a subdirectory such as /~sam/album/).  Use inurl: instead.

inurl:
inurl: restricts your search to the URLs of web pages. This syntax tends to work well for finding search and help pages, because they tend to be rather regular in composition. An allinurl: variation finds all the words listed in a URL but doesn’t mix well with some other special syntax.

inurl:help

allinurl:search help
You’ll see that using the inurl: query instead of the site: query has one immediate advantage: you can use it to search subdirectories.
You can also use inurl: in combination with the site: syntax to draw out information on subdomains. For example, how many subdomains does oreilly.com really have? A quick query will help you figure that out:

site:oreilly.com -inurl:www.oreilly.com

This query asks Google to list all pages from the oreilly.com domain, but leave out those pages which are from the common subdomain www, since you already know about that one.

link:
link: returns a list of pages linking to the specified URL. Enter link:www.google.com and you’ll get a list of pages that link to the Google home page, www.google.com (not anywhere in the google.com domain). Don’t worry about including the http:// bit; you don’t need it and, indeed, Google appears to ignore it even if you do put it in. link: works just as well with “deep” URLs—http://www.raelity.org/apps/blosxom/, for instance—as with top-level URLs such as raelity.org.
cache:
cache: finds a copy of the page that Google indexed even if that page is no longer available at its original URL or has since changed its content completely.

cache:www.yahoo.com

If Google returns a result that appears to have little to do with your query, you’re almost sure to find what you’re looking for in the latest cached version of the page at Google.

The Google cache is particularly useful for retrieving a previous version of a page that changes often.

daterange:
daterange: limits your search to a particular date or range of dates on which a page was indexed. It’s important to note that a daterange: search has nothing to do with when a page was created, but when it was indexed by Google. So a page created on February 2 but not indexed by Google until April 11 would turn up in a daterange: search for April 11.

"Geri Halliwell" "Spice Girls" daterange:2450958-2450968
filetype:
filetype: searches the suffixes or filename extensions. These are usually, but not necessarily, different file types; filetype:htm and filetype:html will give you different result counts, even though they’re the same file type. You can even search for different page generators—such as ASP, PHP, CGI, and so forth—presuming the site isn’t hiding them behind redirection and proxying. Google indexes several different Microsoft formats, including PowerPoint (.ppt), Excel (.xls), and Word (.doc).

homeschooling filetype:pdf

"leading economic indicators" filetype:ppt

Google’s searching abilities go beyond a few keywords entered in a search box. Google provides some special syntaxes for improvising searches. There are a lot of google hacks that can  be used to make powerful searches that save a lot of your time.. I am writing here the few I know. Starting with the basics .

There are two types of search engines on the internet.The first is called searchable subject index. This kind of search engine searches only the titles and descriptions of sites, and doesn’t search individual pages.For example:Yahoo!.Then there full text search engines like Google which index billions of pages. These pages can be searched by url,title, content…….allowing for much narrower and powerful searches.

Boolean default: Whenever you search for more than one keyword at a time, a search engine has a default method to handle the search.This is known as its boolean default. It can be  either boolean AND (returns a page only if all the keywords are present on the page) or Boolean OR (returns a page if any of the keywords is present on the pagekeyword).Google’s boolean default is AND. That is if you search for say ‘firefox hacks’, google returns all pages with words firefox and hacks. If you want say all pages with either Tom or Jerry, you enter:

Tom OR Jerry

or, Tom|Jerry

Next: Search Syntaxes

Started of with kernel hacking. Still apprehensive about the src code mess, I started of here:

http://kernelnewbies.org/

Another great link:

http://tldp.org/LDP/khg/HyperNews/get/khg.html

I picked this up from a site called the  ‘little white dog’ , I dunno why they called it the little white dog. A cool trick I found when searching for something else. I had got bored of the  bootup screen myself (you know, that win logo!) and realised there was no straightforward way for this. Its really worth a try.

The Tools And The Overview
The only tools you are going to need to get the job done is Resource Hacker and some kind of image editing tool.

Sometimes it’s easier to understand what you’re doing after you’ve seen the “big picture”. When Windows 2000 boots, a bitmap image is displayed, this image is stored in a file called NTOSKRNL.EXE which is typically found here: C:WINNTSYSTEM32NTOSKRNL.EXE.  When you install Windows 2000 it will ask you which drive and which directory you would like to install – for the duration of this article we are going to assume you chose the default options and installed Win2K onto your C: drive into the default directory WINNT. Back to the “big picture”, the following is a broad overview of the steps we’ll be preforming in this article:

  • Make a copy of NTOSKRNL.EXE named KERNEL01.EXE
  • Creating a .BMP file that is 640×480 with 16 colors
  • Use Resource Hacker to import the modified bitmap image into KERNEL01.EXE
  • Modify the BOOT.INI file, adding an option to choose KERNEL01.EXE instead of NTOSKRNL.EXE

Step 1. Make a copy of C:WINNTSYSTEM32NTOSKRNL.EXE called KERNEL01.EXE and place it in the C:WINNTSYSTEM32 folder.

Step 2. Download and unzip Resource Hacker. Once it is unzipped, launch “ResHacker.exe”.

Step 3. Click “File”, then “Open”, and browse to the C:WinNTSystem32 directory. Open the file we just created in the first step called KERNEL01.EXE

Step 4. On the left-hand side of the screen, double-click on the word “Bitmap” and then the number “1”. Click the icon that reads “1033” and you should see the Windows 2000 boot logo on the right side of the screen. The “Holy Grail” if you will. At this point, you can minimize Resource Hacker while we prepare our new image.

Step 5. Using any image editor, create a Bitmap image that is 640 x 480 using 16 colors. We’ve found the easiest way to create an image is to take a copy the current image and open it with Photoshop and then edit the top portion. Set the “mode” to “indexed colors” and set the number of colors to 16. Save the file as a BMP file with RLE Compression disabled and you’re all set.

Important! Do not deviate from 640×480 and 16 colors or your results may vary! We’ve tried it with more colors, and all you’ll see is a black screen during the boot sequesnce, in place of the boot logo.

Step 6. Once you have created the image, save it somewhere on your drive taking note of its location.

Step 7. From within Resource Hacker, click on “Action”, then “Replace Bitmap” and a new window will pop-up at this point. Then click on the “Open file with new bitmap” button and browse to the 16-color image you just created. It should look similar to the picture on the right.

Step 8. Once you have selected the file, click on the “Replace” button and you should return to the “root” of Resource Hacker. Just for the hell of it, make sure your change took effect. It should now look something like this:

Step 9. Once everything looks good, click “File” then “Save”.

Step 10. Time for a quick recap of what we’ve done so far. We’ve made a copy of our NTOSKRNL.EXE file and placed it in the C:WINNTSYSTEM32 folder. The copy was named KERNEL01.EXE and was opened using Resource Hacker. The bitmap resource image for the boot logo was replaced with our own customized version, and the file was saved.

Un-Modified Version
Modified Version

Step 11. Conceptually, the next step is to “tell Win2K to use the new KERNEL01.EXE file when it boots, instead of it’s normal NTOSKRNL.EXE file”. We are going to do this by modifying the BOOT.INI file which is located in the root of your C: drive. The file is marked hidden and read-only by default so the first thing we should do is turn off the read-only attribute. Do this by right clicking on the boot.ini file and then clicking on properties. Uncheck the read-only box and click OK to apply changes.

NOTE: if you cannot find your boot.ini file, you probably have Windows Explorer setup so that it cannot view hidden files. Correct this by clicking on Tools and then Folder Options. Go to the View Tab and toggle the radio button to show hidden files and folders

Step – 12. We’re now ready to open the BOOT.INI file and modify its contents. I’ve listed below what my current BOOT.INI file looked like before any changes were made to it. Yours should be somewhat similar.

[boot loader]
timeout=3
default=multi(0)disk(0)rdisk(0)partition(1)WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)WINNT=”Microsoft Windows 2000 Professional” /fastdetect

The line we’re concerned with is the one under [operating systems] – this is the line that NTLDR parses to determine the location of the operating system boot partition. Make a copy of this line and paste is below the existing one. You should also take a minute and make sure the timeout=X line under the [boot loader] section has a value other than zero. This is the number of seconds that the boot menu will be displayed, before it accepts the default value and continues. The default value will be whatever is listed first under the [operating system] section.

[boot loader]
timeout=3
default=multi(0)disk(0)rdisk(0)partition(1)WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)WINNT=”Microsoft Windows 2000 Professional” /fastdetect
multi(0)disk(0)rdisk(0)partition(1)WINNT=”Microsoft Windows 2000 Professional” /fastdetect

Modify the line directly below the [operating systems] heading, adding the following switch to the end: /KERNEL=KERNEL01.EXE (KERNEL01.EXE is the name of the file we modified in the previous steps) By doing this, we are telling NTLDR that we want to boot our system using the specified Kernel file, instead of the default NTOSKRNL file that is used when the /kernel= option does not exist. You should also change the description on this line from “Microsoft Windows 2000 Professional” to something like “Microsoft Windows 2000 Hacked Logo” so you know which option is which. Your boot.ini file should now look like this:

[boot loader]
timeout=3
default=multi(0)disk(0)rdisk(0)partition(1)WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)WINNT=”Microsoft Windows 2000 Hacked Logo” /fastdetect /kernel=kernel01.exe
multi(0)disk(0)rdisk(0)partition(1)WINNT=”Microsoft Windows 2000 Professional” /fastdetect

Before we save this file and move to the dreaded Step 13, let’s recap what we’ve done here just to make sure everything is right. We’ve opened up the boot.ini in edit mode (with read-only turned off) and have made the following changes: the timeout value is greater than zero, the default operating system line was copied and modified to include the /kernel switch pointing to the modified file from the previous steps. The original default operating system line was not changed in any way, it was just “bumped down” a spot to make room for our new kernel file.

Step 13. There really isn’t much to Step 13, just reboot your system. You should be prompted with a menu for a period of 3 seconds asking you which boot option you would like: “The Hacked Logo” or the “Professional Boring” version. It should default to “The Hacked Logo” version after those 3 seconds have expired, since it resides at the top of the list. However should something go amuck and you’ve totally screwed up your “Hacked Logo” kernel file by using a 16-bit color bitmap image, instead of a 16 color image, you can still boot your system up using the original kernel file by choosing the second option on the menu. That’s why is was so important to not make any changes to that line – it’s your software version of an “Oh Shit” handle.

I got introduced to neural networks during the third yr. of engineering. I didn’t quite understand it then (as in I went bananas reading the textbook). I did a bit of googling and found this article on neural networks. Even a 3 yr old can understand this. The guy starts from scratch, explaining the concepts going upto building a standard neural network structure in C++.

http://www.ai-junkie.com/ann/evolved/nnt1.html

The primary problem in windows/linux interoperability is that windows is case insensitive. I found the workaround for this in this article:

http://support.microsoft.com/kb/929110

I have included the gist here:

This problem occurs because a problem in the original .NET Framework 2.0 Setup sets the value of the HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\kernel\ dword:ObCaseInsensitive registry key to 1. The HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\kernel\ dword:ObCaseInsensitive registry key determines whether a file system is case sensitive or case insensitive. If the value of this key is set to 1, the file system is treated as case insensitive. If the value of this key is set to 0, the file system is treated as case sensitive.

Because of the way that the Windows Installer update works, each update returns the registry changes in the original .NET Framework 2.0 Setup. Therefore, the value of the registry key is set to 1, similar to the .NET Framework Setup. This behavior may then overwrite any user-configured value for this key. For example, if you set the value of this registry key to 0 for a case sensitive file system, and you install an update for the .NET Framework 2.0 that was released before November 27, 2006, the value of this registry key will be set to 1 after the update is installed. The result is a case insensitive file system.

Note This problem does not occur in updates for the .NET Framework 2.0 that were released after November 27, 2006.

Workaround:

If you intentionally set the value of the HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\kernel\ dword:ObCaseInsensitive registry key to 0 because you must have case sensitivity for the file system, and an update for the .NET Framework 2.0 has set this value back to 1, set the value for this registry key back to 0 manually. Restart the system for the changes to take effect. For example, if the server is an NFS server in a heterogeneous environment and the registry key value is set to 1, you can set the value back to 0 manually.

Note If you reinstall the .NET Framework 2.0 or you repair or reinstall any .NET Framework 2.0 updates that were released before November 27, 2006, you will have to apply the manual workaround again.

Create your own website, free on WordPress.com.Create your own website.
Start free